From: Richard L. Pickard (nettable_walker@comcast.net)
Date: Fri Jan 16 2004 - 00:52:30 GMT-3
I have two 7206 VXR's with the dual DS3 cards. I am trying to go
back-to-back.
Tucson#
Tucson#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JK9O3S-M), Version 12.2(21a), RELEASE
SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 09-Jan-04 16:34 by kellmill
Image text-base: 0x60008940, data-base: 0x617C6000
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(2)XE2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Tucson uptime is 8 minutes
System returned to ROM by reload at 20:39:30 UTC Thu Jan 15 2004
System image file is "slot0:c7200-jk9o3s-mz.122-21a.bin"
cisco 7206VXR (NPE300) processor (revision D) with 122880K/40960K bytes
of memory.
Processor board ID 20394770
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
4 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
1 HSSI network interface(s)
2 Channelized T3 port(s)
125K bytes of non-volatile configuration memory.
16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x102 (will be 0x2102 at next reload)
Tucson#
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:46 GMT-3