From: jfaure@sztele.com
Date: Mon Jan 12 2004 - 11:41:21 GMT-3
Hi group:
This weekend, someone posted a question relating how you can clasify RTP or
voice traffic for your own, using a class-map or similar.
Imagine you have a branch office router with Frame Relay connetion to the
central office, and you want to reserve bandwith "only for voice flows",
but you're using a dlci to connect to it, that carries data traffic and
voice traffic over it.
How can you associate the class-map to the "rsvp bandwith" command? I've
seen that if you need to configure RSVP in frame relay interfaces, it's
required to enable traffic-shapping too, because the reservation is done
relating to the "mincir" configured. Then, it seems you can apply a service
policy that identifies the RTP traffic to the frame relay map class, but
i'm not sure if this is correct .
Anyone can help?
Regards and thank you very much in advance.
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:43 GMT-3