RE: Distance Command with EIGRP - External routes.

From: Jonathan Hays (nomad@gfoyle.org)
Date: Sun Jan 11 2004 - 22:54:38 GMT-3

• Next message: John Matijevic: "Re: ATM PPP OVER SVC"
• Previous message: Jonathan Hays: "RE: Any way to get rid of backbone ip ospf network"
• Maybe in reply to: Hossam: "Distance Command with EIGRP - External routes."
• Next in thread: arvindyadav@comcast.net: "Re: Distance Command with EIGRP - External routes."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

you wrote:
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of Howard C. Berkowitz
>Sent: Sunday, January 11, 2004 5:28 PM
>To: ccielab@groupstudy.com
>Subject: Re: Distance Command with EIGRP - External routes.
>
>
>At 1:46 PM -0500 1/11/04, <arvindyadav@comcast.net> wrote:
>>You can't change the AD for specific EIGRP External routers.
>But you can
>>change the AD for all external EIGEP router by using distance command.
>>
>>distance 90 180 (170 is default)
>>
>>Arvind
>
>I hasten to add that I haven't tried this, but couldn't you get
>specific routers with a route map matching the IP address of the
>router and setting distance?
= = =

What you suggest (setting per-router distance) only works for *INTERNAL*
EIGRP routes. It simply does not work for External EIGRP (AD=170).

• Next message: John Matijevic: "Re: ATM PPP OVER SVC"
• Previous message: Jonathan Hays: "RE: Any way to get rid of backbone ip ospf network"
• Maybe in reply to: Hossam: "Distance Command with EIGRP - External routes."
• Next in thread: arvindyadav@comcast.net: "Re: Distance Command with EIGRP - External routes."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:39 GMT-3