From: John Matijevic (matijevi@bellsouth.net)
Date: Sun Jan 11 2004 - 19:52:12 GMT-3
Hello Alexi,
I tried to test your command over the weekend and was not able to get ppp
over svc to work. Specifically I had problem with the following:
svc ppp-call nsap BC.CDEF01234567890ABCDEF012.345678901334.13
encapsulation aal5mux ppp virtual-template 1
I could enter the svc command but underneath it,
I could not set the encapsulation to ppp in otherwords I got as far as
encapsulation aal5mux, then I did not have option for PPP.
If anyone has gotten this to work with SVC, I would like to know. I have
tried via doccd, configuration and cisco.com, but with no success.
Also, I got this to work with PVC no problem.
Sincerley,
John
----- Original Message -----
From: "asadovnikov" <asadovnikov@comcast.net>
To: "'Kaiser Anwar'" <kaiseranwar@sbcglobal.net>; <ccielab@groupstudy.com>
Sent: Thursday, December 25, 2003 7:58 PM
Subject: RE: ATM PPP OVER SVC
> The configuration you provided will accept SVC calls, but not initiate
them.
> If you use this configuration you need to configure another side such as
it
> will initiate SVC call to this router, i.e. specify the NSAP address of
this
> router under SVC of another one. Here is an example (I have not tried it
> before posting though):
>
> On another router...
>
> interface Loopback0
> ip address 192.168.2.1 255.255.255.0
> !
> interface ATM0/0
> no ip address
> atm nsap-address BC.CDEF01234567890ABCDEF012.345678901300.00
> no atm ilmi-keepalive
> pvc 0/5 qsaal
> !
> pvc 0/16 ilmi
> !
> svc ppp-call nsap BC.CDEF01234567890ABCDEF012.345678901334.13
> encapsulation aal5mux ppp virtual-template 1
> !
> interface Virtual-Template1
> ip unnumbered Loopback0
> !
>
> You would obviously need to configure NSAP addresses in accordance with
what
> you got on the switch.
>
> Best regards,
> Alexei
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Kaiser Anwar
> Sent: Wednesday, December 24, 2003 12:58 AM
> To: ccielab@groupstudy.com
> Subject: ATM PPP OVER SVC
>
>
> HI,
> I have a config here, according to the doc cd I am not missing anything
but
> it is not working. here is the config. I am using pvc 0/5 qsaal and 0/16
> ilmi. they are not in the doc cd. but I tried it without them too.it does
> not say to statically map it. thanks in advance.
>
> interface Loopback0
> ip address 192.168.1.1 255.255.255.0
> interface ATM0/0
> no ip address
> atm nsap-address BC.CDEF01234567890ABCDEF012.345678901334.13
> no atm ilmi-keepalive
> pvc 0/5 qsaal
> !
> pvc 0/16 ilmi
> !
> svc ppp
> encapsulation aal5auto
> protocol ppp Virtual-Template1
>
> interface Virtual-Template1
> ip unnumbered Loopback0
>
>
> Sincerely,
> Kaiser Anwar
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:39 GMT-3