From: Sumit.kumar@comcast.net
Date: Sun Jan 11 2004 - 15:21:01 GMT-3
I have Cisco 8510 switch which I'm trying to configure for Lab practice for
PVC's & SVC's.
I have two routers with IMA cards connected to port 4 & 5 on 8 port IMA
card on switch.
I'm trying to create VPI VCI Mappings but I get errors on second interface
configuration: And also in there anything I need to add for SVCs.
ATM8510(config)#int atm 3/1/4
ATM8510(config-if)#atm pvc 0 100 interface atm 3/1/5 0 200
%connection creation fails: vpi/vci has been used by other connections
the current configuration on switch is:
atm address 47.0091.8100.0000.000b.465e.d901.000b.465e.d901.00
atm router pnni
no aesa embedded-number left-justified
node 1 level 56 lowest
redistribute atm-static
!
interface ATM3/1/4
no ip address
no ip directed-broadcast
logging event subif-link-status
no atm auto-configuration
no atm ilmi-keepalive
atm uni version 3.1
atm maxvpi-bits 3
atm maxvci-bits 10
no ima-group
!
interface ATM3/1/5
no ip address
no ip directed-broadcast
logging event subif-link-status
no atm auto-configuration
no atm ilmi-keepalive
atm uni version 3.1
atm maxvci-bits 10
atm pvc 0 200 interface ATM3/1/4 0 100
no ima-group
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:39 GMT-3