From: Andy Canizares (ccie@jzr.com)
Date: Sat Jan 10 2004 - 20:45:38 GMT-3
Hossam.. Try the "distance eigrp [internal-distance]
[external-distance]" command
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fiprrp_r/1rfeigrp.htm#1017590
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hossam
Sent: Saturday, January 10, 2004 6:14 PM
To: ccielab@groupstudy.com
Subject: Distance Command with EIGRP - External routes.
Guys,
Can we change the default AD for external EIGRP routers from 170? I am
trying to use the distance command under eigrp to make the AD = 160. I
can't do it.
i tried all the Distance command posibalities. I tried with or without
access list. I tried using the router ID in the router ip address. I
treid the advertising interface IP address in the router ip address.
BUT NO HOPE.
I can easily change the AD for internal EIGRP routes from 90 to anything
else. To do this i use
Distance 95 <ip address> (I use neighbour interface ip) <wild card mask>
And it works.
But i can't reach a way to make it work with External routes ..
Any comments/advice!!!
thanks
---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:39 GMT-3