Re: Two ISPs -- Two NAT Pools, One Inside subnet

From: Larry Roberts (larryr@netbeam.net)
Date: Sat Jan 10 2004 - 01:44:46 GMT-3

• Next message: Andy: "EIGRP topology Question"
• Previous message: Richard Davidson: "Re: redistribution filtering types for each protocol"
• Maybe in reply to: Barman, Partha: "Two ISPs -- Two NAT Pools, One Inside subnet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Partha,

This link may help you accomplish what you are trying to do:

http://www.cisco.com/warp/public/105/nat_routemap.html

HTH,
Larry Roberts
CCIE #7886 (R&S / Security)

----- Original Message -----
From: "Barman, Partha" <PBarman@necbns.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, January 08, 2004 4:59 PM
Subject: Two ISPs -- Two NAT Pools, One Inside subnet

> Is there a way to configure NAT with multiple pools? What I want to
achieve
> is that there are two ISPs and I have two public address ranges. I will
use
> ISP1 as primary and ISP2 as backup. So the same inside subnet has to use
> different NAT pools at different times, depending on which ISP is
currently
> the primary.
>
> Please help!!
>
> Partha
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Andy: "EIGRP topology Question"
• Previous message: Richard Davidson: "Re: redistribution filtering types for each protocol"
• Maybe in reply to: Barman, Partha: "Two ISPs -- Two NAT Pools, One Inside subnet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:39 GMT-3