From: Church, Chuck (cchurch@wamnetgov.com)
Date: Tue Jan 06 2004 - 20:37:27 GMT-3
Here's the rule on the 2500s:
Physically, all the boards have one single inline memory module (SIMM) slot (72-pin, 70 ns). Furthermore, if the board's revision level is A through G, there are an additional 2 MB of RAM soldered to the system card. If the revision level is I through N, there is no RAM soldered to the system card.
The board revision number can be checked using the show version command:
cisco 2500 (68030) processor (revision A) with 16380K/2048K bytes of memory.
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch@wamnetgov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=index&search=cchurch%40wamnetgov.com
-----Original Message-----
From: Nathasha Aleyevka [mailto:naleyevka@yahoo.com]
Sent: Tuesday, January 06, 2004 3:43 PM
To: ccielab@groupstudy.com; cisco@groupstudy.com
Subject: Simple Q:CBWFQ !
I have been working on CBWFQ
config and have a question regarding class-map
creation.
I defined the class maps for protocols X, Y and Z,
then create a policy and finally applied it to an
interface
class-map match-any X
match protocol X
class-map match-any Y
match protocol Y
class-map match-any Z
match protocol Z
Q1: When do I use match-all vs match-any?
Q2: For the rest of the traffic do I need to define a
class-map match "class-default" or
class-map match Other-- does it matter?
Thank you
Nathasha
__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:37 GMT-3