From: phase90 (phase90@comcast.net)
Date: Mon Jan 05 2004 - 21:22:44 GMT-3
Nathasha,
I would prune your trunks manually on as needed basis per
interface. Unless all your switches in you VTP domain are running images
where the pruning code is stable, and proven
reliable, you could break your network. How do I know this? Because it
happened to me once
although it was a while ago on some catalyst 6509s. I used the global
command "set vtp pruning enable" and 1 of the switches had a bad image in
it. This caused the vlan to break - dhcp and other
network services. Good Luck.
Jerry
----- Original Message -----
From: "Nathasha Aleyevka" <naleyevka@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Monday, January 05, 2004 5:23 PM
Subject: Pruning!
> Hi,
>
> I know that Pruning increases available bandwidth on a
> trunk link, now if I have to remove traffic from a
> VLAN that is not locally assigned to it, would I
> enable prunning(global configuration mode) on both
> sides of the link and be done with it.
>
> Is there any additional configuration needed to
> accomplish this?
> Thank you
>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing.
> http://photos.yahoo.com/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:37 GMT-3