Manipulating a single route only WITHOUT ACL

From: Stephen Skinner (stephen_ski@hotmail.com)
Date: Sat Jan 03 2004 - 17:06:21 GMT-3

• Next message: Stephen Skinner: "^$200*.*"
• Previous message: Bob Sinclair: "Re: Eigrp Redistribution Metrics"
• Next in thread: ward Priestman: "Re: Manipulating a single route only WITHOUT ACL"
• Maybe reply: ward Priestman: "Re: Manipulating a single route only WITHOUT ACL"
• Maybe reply: John Underhill: "Re: Manipulating a single route only WITHOUT ACL"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

guys,

got this question.....any idea`s.....i have non

1. NO STATIC/DEFAULT ROUTES allowed
2. NO ACL`S ALLOWED

r1 ----switch-------r2---FR----r4
               | -------r3---FR----r5

R4 and R5 are directly connected ....
R2 and R3 are connected to the same switch and same Vlan
all 4 routers are in the same FR cloud

i need to ping r4 FROM r1 and only go through R3

i know the best route to R4 IS via R2 ...but how can i force it to use R3
WITHOUT using default routes/network`s or using ACL`s (route map)

R1 is opsf and r4/5 are in EIGRP...

Many thanks in advance

steve

• Next message: Stephen Skinner: "^$200*.*"
• Previous message: Bob Sinclair: "Re: Eigrp Redistribution Metrics"
• Next in thread: ward Priestman: "Re: Manipulating a single route only WITHOUT ACL"
• Maybe reply: ward Priestman: "Re: Manipulating a single route only WITHOUT ACL"
• Maybe reply: John Underhill: "Re: Manipulating a single route only WITHOUT ACL"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:36 GMT-3