From: Hyunseog Ryu (r.hyunseog@ieee.org)
Date: Wed Dec 31 2003 - 14:10:28 GMT-3
Just in case if you need detailed info for OAM,
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_configuration_example09
186a0080094570.shtml
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800946
1c.shtml
Hyun
On Wed, 31 Dec 2003 10:52:45 -0600, Hyunseog Ryu wrote
> Use OAM for that purpose.
> Essentially MGX RPM switch interface is modifed ATM interface,
> so you can use ATM OAM cell for that purpose.
>
> Hyun
>
> On Wed, 31 Dec 2003 18:00:58 +0200, Ahmed Hassan wrote
> > Dear all,
> > does anyone know how to make the interface switch on RPM{on MGX
> > 8850} sense a failure in atm connection and go down in case of any
> > problem in the atm vc
> >
> > best regards
> >
> > *************************************
> > Ahmed Hassan El-shinnawy
> > Network Planning and configuration Engineer
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> --
> Hyunseog Ryu
> Senior Network Engineer
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Hyunseog Ryu Senior Network Engineer
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3