From: Yasser Aly (blackyeyes00@hotmail.com)
Date: Tue Dec 30 2003 - 09:41:34 GMT-3
Alec,
The use of an MSDP mesh group is unnecessary when only two Anycast RPs are
configured. However, if there are more than two Anycast RPs, you should
configure MSDP mesh groups to prevent looping of Source-Active (SA)
messages.
>From: "Pun, Alec CL" <Alec.CL.Pun@pccw.com>
>Reply-To: "Pun, Alec CL" <Alec.CL.Pun@pccw.com>
>To: ccielab@groupstudy.com
>Subject: MSDP peer
>Date: Tue, 30 Dec 2003 19:57:21 +0800
>
>Hi group,
>
>If only two routers are running MSDP, can we omit the mesh-group command ?
>http://www.cisco.com/en/US/tech/tk828/tk363/technologies_white_paper09186a00
>800d6b63.shtml#xtocid11
>
>ip msdp peer 20.0.0.3 connect-source Loopback0
>ip msdp mesh-group anycast 20.0.0.3 <-- can it be removed ?
>ip msdp originator-id Loopback0
>
>rgds,
>alec
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3