From: Snow, Tim (timothy.snow@eds.com)
Date: Fri Dec 26 2003 - 04:22:27 GMT-3
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
mc_r/mult/1rfmult2.htm#1019858
override
(Optional) Indicates that if there is a conflict, the RP configured with
this command prevails over the RP learned by Auto-RP.
Group mode and RP address mappings learned through Auto-RP and BSR take
precedence over mappings statistically defined by the ip pim rp-address
command without the override keyword. Commands with the override keyword
take precedence over dynamically learned mappings.
One quick thing, you should get used to learning how to use the DOC cd. In
the time it took you to compose your question to the group, I had already
found the answer.
Tim
#12042
-----Original Message-----
From: Paul Chen [mailto:cpjchen@starhub.net.sg]
Sent: Friday, December 26, 2003 2:14 AM
To: ccielab@groupstudy.com
Subject: multicast - rp overide
Hi ,
Just wondering if anyone could explain why and when the command option
OVERRIDE is used.
ip pim rp-address rp-address [access-list] [override
Thanks.
Paul
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:45 GMT-3