From: 1cmpecho (1cmpecho@hotpop.com)
Date: Wed Dec 24 2003 - 18:49:57 GMT-3
john - sorry - had mgcp and different endpoints on my mind. here are some
options
h323 - for your outbound pots call leg, create a second pots dial peer and
preference the second pri over the first. ccm should send all 9.@ to it
and then pots dial peer will be matched and sent out outbound dial peer.
mgcp - different endpoints will be registered and you can do like i
mentioned before - prefer one over the other by order in your route
groups/lists
At 10:59 AM 12/24/2003 -0800, John Humphrey wrote:
>I've got a CallManager (v3.1). The PSTN gateway is a 2620 router with a
>VWIC-1MFT-T1 card in it. We've got an ISDN PRI coming in with H.323
>running between the CCM and the gateway. We've recently ordered a second
>PRI (the first is running low on available lines). I've also ordered
>VWIC-2MFT-T1 card to go in the WIC slot. I've used this type card plenty
>of times for data T1 circuits, but I've having a hard time finding some
>good documentation explaining how to add the second PRI to the CCM gateway
>list. I'd like to use the first one for incoming calls and the second for
>outgoing. Any idea where I can find some more info on this?
>
>John Humphrey
>
>
>---------------------------------
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:44 GMT-3