From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Dec 24 2003 - 07:47:12 GMT-3
Did you see the restrictions for PPP over SVCs? Dialout mode is not
supported.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kaiser Anwar
Sent: Tuesday, December 23, 2003 9:58 PM
To: ccielab@groupstudy.com
Subject: ATM PPP OVER SVC
HI,
I have a config here, according to the doc cd I am not missing anything but
it
is not working.
here is the config. I am using pvc 0/5 qsaal and
0/16 ilmi. they are not in the doc cd. but I tried it without them too.it
does
not say to statically map it. thanks in advance.
interface Loopback0
ip address 192.168.1.1 255.255.255.0
interface ATM0/0
no ip address
atm nsap-address BC.CDEF01234567890ABCDEF012.345678901334.13
no atm ilmi-keepalive
pvc 0/5 qsaal
!
pvc 0/16 ilmi
!
svc ppp
encapsulation aal5auto
protocol ppp Virtual-Template1
interface Virtual-Template1
ip unnumbered Loopback0
Sincerely,
Kaiser Anwar
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:44 GMT-3