From: Barman, Partha (PBarman@necbns.com)
Date: Thu Dec 18 2003 - 12:25:04 GMT-3
Calls come in one ISDN BRI voice circuits and are sent to CallManager. Have
the translation rules below in the router. DID is 7903499 which is being
translated to Unity pilot number 1475. When you call the DID, it keeps on
ringing for about 2 mins, and then says that " your party is not answering,
please try your call later ". If you call Unity pilot 1475 from an internal
IP phone it works fine. If you modify the translation rule to make the call
go to an IP phone extension, it rings the phone and audio path is
established upon picking the phone.
translation-rule 1475
Rule 0 7903499 1475
dial-peer voice 100 voip
preference 1
destination-pattern 7903499
translate-outgoing called 1475
session target ipv4:10.1.8.2
dtmf-relay h245-alphanumeric
Any ideas please??
Thanks,
Partha
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:42 GMT-3