From: arvindyadav@comcast.net
Date: Tue Dec 16 2003 - 16:44:28 GMT-3
1. If on R3 eigrp is enabled on loopback 0, then why do you need to
redis connected. Just make sure you have network statement under eigrp
router eigrp 2
net 10.0.0.0
2. If both the router R2 and R3 redistribute the AS2 to AS1 then R1 will
get two route and both will external D EX. R1 will select the better metric
router.
3 R2 will be getting this router as internal
4. If redistribution ( as2 to as1) is happening only of R3 then R1 get only
one router i.e from R3.
I have simulated and I got two routes in eigrp topo on R1 and it select best
route via 150.50.124.6 (R3) because of better metric.
R1# sh ip ei topo
IP-EIGRP Topology Table for process 1
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status
P 10.1.1.0/24, 1 successors, FD is 409600
via 150.50.124.6 (409600/128256), Ethernet0
via 150.50.124.5 (412160/156160), Ethernet0
R1#sh ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
U - per-user static route, o - ODR
Gateway of last resort is not set
10.0.0.0/24 is subnetted, 1 subnets
D EX 10.1.1.0 [170/409600] via 150.50.124.6, 00:01:31, Ethernet0
regds
Arvind
----- Original Message -----
From: "kasturi cisco" <kasturi_cisco@hotmail.com>
To: <Danny.Andaluz@triaton-na.com>; <vdadlaney@comcast.net>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, December 16, 2003 11:07 AM
Subject: RE: Redistribute Connected Issue
> Danny,
>
> I think what possibly is happening is when u have a route-map for "redi
> connected" on R3 u are not including the Loopback on R3. so what happens
> is the loopback wont go from R3 to R1.Since loopback is in EIGRP it
> reaches R2 as (D) and then R1 (D EX) and hence R1 possible has only 1
> route to the loopback via R2.
>
> Does ur R1 routing table and/or toplogy table show 2 routes for the
> loopback. Can u post the configs with route table for all 3.
>
> HTH.Let us know what u find.
>
> Good Luck,
> Kasturi.
>
> ------------------------------------------------------------------------
>
> Stand out from the crowd. Make your own MMS cards. Have some mobile
> masti!
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:42 GMT-3