From: Danny Ng (danny_ng@cnadvisers.com)
Date: Tue Dec 16 2003 - 00:02:07 GMT-3
Have any one has the experience of configured frame relay PVC to route through
the single tunnel interface? For example;
interface Serial5/7
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay lmi-n392dce 3
frame-relay lmi-n393dce 5
frame-relay route 176 interface Tunnel0 176
frame-relay route 276 interface Tunnel0 276
frame-relay route 376 interface Tunnel0 376
!
interface Tunnel0
no ip address
tunnel source Serial1/0
tunnel destination 192.168.15.198
!
Any problem of doing so? How much actually the bandwidth allocation for Tunnel
interface? I know we can do it by create more tunnel interfaces.
Regards,
Danny
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3