From: Reisner, Tim (TR126568@exchange.DAYTONOH.NCR.com)
Date: Mon Dec 15 2003 - 10:24:41 GMT-3
The sdlc line could be multipoint, i.e. multiple controllers (PUs) sharing
the line. Each has a unique address, i.e. 01, C1, etc. The vmac is
setup with a "xx" - "00" last byte so that the address of the controller
(PU) can be placed there and make the vmac unique for each controller (PU)on
the line.
The sdlc address is a configurable parameter on the controller (PU) and the
cisco value must match for the DLC portion to come up. This is true for PU
type 2/2.1 nodes. However, with PU4 to PU4 links, INN links, the value
can be chosen at random under certain conditions. The following link
explains the INN link issue.
http://www.cisco.com/en/US/tech/tk331/tk336/technologies_tech_note09186a0080
093ec9.shtml
regards,
Tim Reisner
CCIE #10418
CCDA
NCR Corp.
High Availability Networking Global Support Center
Phone: (763)535-3274
Cell: (763)227-3179
Email: Tim.Reisner@NCR.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tom
Young
Sent: Monday, December 15, 2003 6:17 AM
To: ccielab@groupstudy.com
Subject: sdlc config
Hi, group
Two question about sdlc, althougt nothing about sdlc
will appear in ccie exam, but I want to know it.
1, Does the vamc always 4000.5394.00xx ? Why ??
sdlc vmac 4000.5394.0012
2, And how can I get the sdlc address ? May set any number
to for it ?
Thanks alot
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3