From: rnasr (rnasr@s2n.com.au)
Date: Sun Dec 14 2003 - 09:50:09 GMT-3
router eigrp 100
P4Cat2(config-router)#distance ei
P4Cat2(config-router)#distance eigrp ?
<1-255> Distance for internal routes
P4Cat2(config-router)#distance eigrp 150 ?
<1-255> Distance for external routes
P4Cat2(config-router)#distance eigrp 150 200 ?
<cr>
P4Cat2(config-router)#distance eigrp 150 200
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ward Priestman
Sent: Monday, December 15, 2003 9:52 PM
To: ccielab@groupstudy.com
Subject: Re: Eigrp distance command
thaqt command is not allowed
G3R5(config-router)#distance 255 ?
A.B.C.D IP Source address
any other ideas ?
----- Original Message -----
From: "rnasr" <rnasr@s2n.com.au>
To: "'ward Priestman'" <ccie@priestman.org>
Sent: Sunday, December 14, 2003 5:28 AM
Subject: RE: Eigrp distance command
> try distance 200 255 etc...
>
>
> 200 for internal
> 255 for external
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ward Priestman
> Sent: Monday, December 15, 2003 3:46 AM
> To: ccielab@groupstudy.com
> Subject: Eigrp distance command
>
>
> Hi all
>
> I have tried using the distance command under eigrp to influence incoming
> routes. I have noticed it does not affect external routes
>
> any ideas why
>
>
> ie
>
> distance 255 139.3.139.3 0.0.0.0
>
> thanks
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3