EIGRP over frame

From: rnasr (rnasr@s2n.com.au)
Date: Fri Dec 12 2003 - 12:13:45 GMT-3

• Next message: marvingreenlee@yahoo.com: "Re: Can I use windows calculator?"
• Previous message: John Tafasi: "Can I use windows calculator?"
• Next in thread: Bob Sinclair: "Re: EIGRP over frame"
• Maybe reply: Bob Sinclair: "Re: EIGRP over frame"
• Maybe reply: kasturi cisco: "Re: EIGRP over frame"
• Maybe reply: Hogo, Trust: "RE: EIGRP over frame"
• Maybe reply: ward Priestman: "Re: EIGRP over frame"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have the following EIGRP over partial mesh frame config utilising
multipoint and physical interfaces - although passive default is set I can
still see all the other networks advertised despite the fact that the
interfaces appear as passive for these networks under "sh ip protocol" -
could someone shed some light on this - THANKS.

R1..........................
interface FastEthernet0/0
 ip address 153.5.66.1 255.255.255.0

interface Serial0/0.1 multipoint
 ip address 153.5.200.1 255.255.255.240
 frame-relay map ip 153.5.200.3 103 broadcast
 frame-relay map ip 153.5.200.4 104 broadcast
 no frame-relay inverse-arp

router eigrp 5
 passive-interface default
 no passive-interface Serial0/0.1
 network 153.5.0.0
 neighbor 153.5.200.4 Serial0/0.1
 neighbor 153.5.200.3 Serial0/0.1

r1#sh ip ro eigrp
     153.5.0.0/16 is variably subnetted, 5 subnets, 3 masks
D 153.5.232.0/28 [90/21024000] via 153.5.200.3, 00:20:30, Serial0/0.1
D 153.5.58.0/28 [90/20537600] via 153.5.200.3, 00:06:41, Serial0/0.1
D 153.5.43.0/25 [90/20514560] via 153.5.200.4, 00:20:25, Serial0/0.1

R3...............
interface Ethernet0
 ip address 153.5.58.1 255.255.255.240

interface Serial0.1 multipoint
 ip address 153.5.200.3 255.255.255.240
 frame-relay map ip 153.5.200.1 301 broadcast
 frame-relay map ip 153.5.200.4 301 broadcast
 no frame-relay inverse-arp

router eigrp 5
 passive-interface default
 no passive-interface Serial0.1
 network 153.5.0.0
 neighbor 153.5.200.4 Serial0.1
 neighbor 153.5.200.1 Serial0.1

r3#sh ip ro eigrp
     153.5.0.0/16 is variably subnetted, 5 subnets, 3 masks
D 153.5.43.0/25 [90/2172416] via 153.5.200.4, 00:17:25, Serial0.1
D 153.5.66.0/24 [90/2172416] via 153.5.200.1, 00:17:25, Serial0.1

R4........................
interface FastEthernet0
 ip address 153.5.43.44 255.255.255.128

interface Serial0
 ip address 153.5.200.4 255.255.255.240
 encapsulation frame-relay
 frame-relay map ip 153.5.200.1 401 broadcast
 frame-relay map ip 153.5.200.3 401 broadcast
 no frame-relay inverse-arp
 frame-relay lmi-type cisco

router eigrp 5
 passive-interface default
 no passive-interface Serial0
 network 153.5.0.0
 neighbor 153.5.200.3 Serial0
 neighbor 153.5.200.1 Serial0

r4#sh ip ro eigrp
     153.5.0.0/16 is variably subnetted, 5 subnets, 3 masks
D 153.5.232.0/28 [90/2681856] via 153.5.200.3, 00:18:20, Serial0
D 153.5.58.0/28 [90/2195456] via 153.5.200.3, 00:04:33, Serial0
D 153.5.66.0/24 [90/2172416] via 153.5.200.1, 00:18:20, Serial0

• Next message: marvingreenlee@yahoo.com: "Re: Can I use windows calculator?"
• Previous message: John Tafasi: "Can I use windows calculator?"
• Next in thread: Bob Sinclair: "Re: EIGRP over frame"
• Maybe reply: Bob Sinclair: "Re: EIGRP over frame"
• Maybe reply: kasturi cisco: "Re: EIGRP over frame"
• Maybe reply: Hogo, Trust: "RE: EIGRP over frame"
• Maybe reply: ward Priestman: "Re: EIGRP over frame"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3