From: Church, Chuck (cchurch@wamnetgov.com)
Date: Wed Dec 10 2003 - 23:54:10 GMT-3
Looks like they're dropping support for EGP in 12.3. Perhaps it's time
to put those AGSs out to pasture :)
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch@wamnetgov.com
PGP key:
http://pgp.mit.edu:11371/pks/lookup?op=index&search=cchurch%40wamnetgov.
com
> -----Original Message-----
> From: Michael Whisenant [mailto:mwhisen@hiwaay.net]
> Sent: Wednesday, December 10, 2003 8:14 PM
> To: Church, Chuck; nomad@gfoyle.org
> Cc: ccielab@groupstudy.com
> Subject: RE: Autonomous-system global command??
>
>
> Yep lots of old government routers still running EGP out
> there. I have a
> router with a peering session to 2 customers off a LAN
> segment running EGP
> and they will not change. I am finally pulling the NME card
> and that we
> will have to get current...
>
> At 06:45 PM 12/10/2003, Church, Chuck wrote:
> >It's possible. It's a govt router, may have had EGP at one
> time. Thanks
> >for the info.
> >
> >Chuck Church
> >CCIE #8776, MCNE, MCSE
> >Wam!Net Government Services
> >13665 Dulles Technology Dr. Ste 250
> >Herndon, VA 20171
> >Office: 703-480-2569
> >Cell: 703-819-3495
> >cchurch@wamnetgov.com
> >PGP key:
> >http://pgp.mit.edu:11371/pks/lookup?op=index&search=cchurch%4
> 0wamnetgov.com
> >
> > > -----Original Message-----
> > > From: JHays [mailto:nomad@gfoyle.org]
> > > Sent: Wednesday, December 10, 2003 11:56 AM
> > > To: Church, Chuck
> > > Cc: ccielab@groupstudy.com
> > > Subject: RE: Autonomous-system global command??
> > >
> > >
> > > Not sure in the context of EIGRP, but it would be the first
> > > configuration step for the now obsolete EGP (replaced by BGP). See
> > > "Routing TCP/IP Volume 2" page 26.
> > >
> > > Maybe left over from a legacy config?
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > > Behalf Of
> > > Church, Chuck
> > > Sent: Wednesday, December 10, 2003 12:19 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Autonomous-system global command??
> > >
> > >
> > > All,
> > >
> > > Came across a config today on a cat 5500 RSM layer 3
> module that
> > > shows up as:
> > >
> > > !
> > > autonomous-system 81
> > > !
> > > router eigrp 81
> > > network y.x.0.0
> > > !
> > >
> > > Any idea what the global command 'autonomous-system 81'
> does? It's
> > > running 12.0 code, but the command isn't in the master
> index. Didn't
> > > find it under any of the routing protocol guides either.
> Using the
> > > local help didn't explain it either, just said local as
> number. Any
> > > ideas?
> > >
> > > Thanks,
> > > Chuck Church
> > >
> > > ______________________________________________________________
> > > _________
> > > Please help support GroupStudy by purchasing your study
> > > materials from:
> > > http://shop.groupstudy.com
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >_____________________________________________________________
> __________
> >Please help support GroupStudy by purchasing your study
> materials from:
> >http://shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:39 GMT-3