Aironet 1100 problem

From: Tony Singh (A) (SinghA1@telkom.co.za)
Date: Tue Dec 09 2003 - 15:41:53 GMT-3

Next message: Ken.Farrington@barclayscapital.com: "NBAR"
Previous message: navaid@rogers.com: "Second attempt. CCIE#12625"
Next in thread: Phil: "Re: Aironet 1100 problem"
Maybe reply: Phil: "Re: Aironet 1100 problem"
Maybe reply: Phil: "Re: Aironet 1100 problem"
Maybe reply: Shane Joiner: "RE: Aironet 1100 problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all

Can someone please help with this problem I have.

I have 2 AP's installed at a client office with +- 50 users. The AP's
are approx. 20 meters apart from each other. The clients are getting
IP's from a central DHCP server and there is sufficient IP's for all.
Separate channels have been configured on each AP so that they should
not overlap with their frequencies. The issue I'm having is when all
of the clients connect to the AP's simultaneously they cannot
establish a permanent connection. All of the clients devices signals
switch from one AP to the other continuously.

Configs as follows:

AP-1

interface Dot11Radio0

ssid TRAINone

authentication open

infrastructure-ssid

speed basic-1.0 basic-2.0 basic-5.5 basic-11.0

rts threshold 2312

power client 50

channel 2412

station-role root

no cdp enable

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

AP-2