From: Ken.Farrington@barclayscapital.com
Date: Mon Dec 08 2003 - 16:20:59 GMT-3
Guys, excellent car page on http://www.opalsoft.net/qos/WhyQos-2425.htm
qeustion i have thopught of from reading this,
rate limit out traffic to 20k/40k/60k (bw/bur/exbur) for all priority
(prec1) traffic, if exceed should be prec 0 (normal)
also
all other traffic rate limit out to 100k/120k/140k
on the first CAR statement, I am not sure if I use set-prec-continue or
set-prec-transmit ?
also,
when is the exceed limit actioned, on the BW/Burst/ExBurst?
Hope this does not sound too stupid a question??????
int e0/0
rate-limit out access-group 121 20000 40000 60000 conform-action transmit
exceed-action set-prec-continue 0
rate-limit out access-group 122 100000 1200000 1400000 conform-action
transmit exceed-action drop
!
access-list 121 permit ip any any prec 1
access-list 122 permit ip any any
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:37 GMT-3