From: zzk (ccie_99@yahoo.com)
Date: Mon Dec 08 2003 - 12:35:20 GMT-3
Thanks, John
This is a smart idea.
Got one more question (Just to help me to understand
it better). I thought the distance 255 method will
block the route to be inserted into the particular
router's routing table, does it affect the LSA sent
out or does it affect how the rest of routers build
their routing table?
regards
--- John Underhill <stepnwlf@magma.ca> wrote:
> On the border router simply apply distance of 255
> and route will be removed from NSSA routers..
>
> router ospf 100
> area 1 nssa no-summary
> passive-interface default
> no passive-interface Serial0
> network 150.50.1.0 0.0.0.255 area 1
> network 201.1.1.0 0.0.0.255 area 0
> distance 255 0.0.0.1 255.255.255.0 1
> !
> access-list 1 permit 0.0.0.0
> ----- Original Message -----
> From: zzk
> To: swm@emanon.com ; ccielab@groupstudy.com
> Sent: Monday, December 08, 2003 9:33 AM
> Subject: RE: how to filter out default route in
> OSPF totally stub area?
>
>
> Hi Scott
> Thanks for your reply.
> I think there is nssa totally stub areas. You can
> see
> it at
>
>
http://www.cisco.com/en/US/tech/tk365/tk480/technologies_tech_note09186a0080094a88.shtml#definestub
>
> The exit point of the whole network is inside this
> area 1, so this ASBR has to generate default route
> for
> the whole network. However we are trying to reduce
> the
> number of LSAs in this area 1, thats why we also
> want
> to use totally stub area.
>
> I hope you understand the senario, and appreciate
> if
> there is any better idea.
>
> regards
> --- Scott Morris <swm@emanon.com> wrote:
> > If your area is "totally stub" then it is NOT
> > "nssa". If it is "nssa",
> > then it is NOT "totally stub". You have to
> choose
> > one or the other. If
> > you are configuring it as an nssa, then you have
> to
> > add a specific
> > command to generate a default route, it's not in
> > there automatically.
> >
> > If you are a totally stubby area, it's generated
> > automatically. If you
> > don't want it to do that because there is more
> than
> > one exit point, then
> > you configured the area wrong.
> >
> > Otherwise, if information is coming from another
> > protocol, you can
> > always play with distance in order to prefer one
> > over the other. But
> > I'd suggest looking to fix your area setup
> first.
> >
> >
> > Scott Morris, CCIE4
> (R&S/ISP-Dial/Security/Service
> > Provider) #4713,
> > CISSP, JNCIS, et al.
> > IPExpert CCIE Program Manager
> > IPExpert Sr. Technical Instructor
> > swm@emanon.com/smorris@ipexpert.net
> > http://www.ipexpert.net
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com] On Behalf Of
> > zzk
> > Sent: Monday, December 08, 2003 5:44 AM
> > To: ccielab@groupstudy.com
> > Subject: how to filter out default route in OSPF
> > totally stub area?
> >
> >
> > Hi
> > We have a totally stubby NSSA configured. Is
> there a
> > way we can block the default route generated by
> the
> > ABR?
> >
> > The reason is we need the routers to learn the
> > default
> > from another ASBR instead of this ABR.
> >
> > By default, ABR is automatically injecting a
> default
> > route of type IA, but ASBR is advertising a
> default
> > route of external type. Thus all routers chose
> the
> > ABR
> > instead of this ASBR.
> > Thanks
> >
> > __________________________________
> > Do you Yahoo!?
> > New Yahoo! Photos - easier uploading and
> sharing.
> > http://photos.yahoo.com/
> >
> >
>
>
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:37 GMT-3