From: pita40 (pita40@hotmail.com)
Date: Thu Dec 04 2003 - 17:32:34 GMT-3
THis link has the command you need.
12.2(8)
You can also use tunnels to solve the problem if the above is not allowed.
----- Original Message -----
From: "Ahmed" <ahmed_mustafa01@excite.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, December 04, 2003 2:04 PM
Subject: ISIS over Frame-Relay
> How would I overcome the problem running ISIS over Frame-Relay in
Hub/Spoke Environments: Here is the issue: Hub Router: configured as P2M,
so the default network type is p2MOne Spoke: Configured as Non-Broadcast2nd
Spoke: Configured as P2P. Note: Interface configuration can't be changed.
In OSPF environments, one can easily fix this by using "IP OSPF NETWORK"
Command, but there is no such command for ISIS, I guess, unless 12.2 offers
something which I don't know. The only thing I come up with use Tunnel
interfaces that could build the adjanceny b/w the routers without violating
any rules. Thanks in advance, Abbas
>
> _______________________________________________
> Join Excite! - http://www.excite.com
> The most personalized portal on the Web!
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:35 GMT-3