Point-to-Multipoint non-broadcast command

From: Ahmed (ahmed_mustafa01@excite.com)
Date: Sun Nov 30 2003 - 00:40:23 GMT-3

• Next message: nettable_walker@comcast.net: "Re: Time while labbing ?"
• Previous message: William Boye: "RE: OSPF neigbor cost"
• Next in thread: Brian Dennis: "RE: Point-to-Multipoint non-broadcast command"
• Maybe reply: Brian Dennis: "RE: Point-to-Multipoint non-broadcast command"
• Maybe reply: Ahmed: "RE: Point-to-Multipoint non-broadcast command"
• Maybe reply: Weidong Xiao: "RE: Point-to-Multipoint non-broadcast command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

 What is the reason for the command "POINT-TO-MULTIPOINT NON-BROADCAST" in an OSPF over Frame-Relay environment? I read the document on CCO, but was not very clear. Can someone please explain it with the example? Thanks, Ahmed

• Next message: nettable_walker@comcast.net: "Re: Time while labbing ?"
• Previous message: William Boye: "RE: OSPF neigbor cost"
• Next in thread: Brian Dennis: "RE: Point-to-Multipoint non-broadcast command"
• Maybe reply: Brian Dennis: "RE: Point-to-Multipoint non-broadcast command"
• Maybe reply: Ahmed: "RE: Point-to-Multipoint non-broadcast command"
• Maybe reply: Weidong Xiao: "RE: Point-to-Multipoint non-broadcast command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:34 GMT-3