From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Nov 28 2003 - 15:39:42 GMT-3
The commands relate to the Call Distributor application programming
interface (API). If you are interested in the Call Distributor API, look
under the ISDN interfaces for Voice configuration guide.
Commands like these that show up in the configuration by default have either
had some parameter changed or are new commands. Normally when Cisco changes
the default state or parameters for a command, Cisco will have the command
show up in the configuration for the next couple major releases.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tasuka Amano Hsu
Sent: Thursday, November 27, 2003 11:21 PM
To: ccielab@groupstudy.com
Subject: CDAPI
Sorry what this 3 command for on isdn or dialer ?
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
I can not file it on Doc CD!
Sincerely,
Tasuka
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:19 GMT-3