From: William Chen (kwchen@netvigator.com)
Date: Thu Nov 27 2003 - 14:03:43 GMT-3
Jonathan,
I DO read the DocCD and try to would out a scenario as the command
states.
However, I do not find the command works as the DocCD states. I don't
know if I miss something and I try to seek for help here if anyone do
understand the commands said or anyone use this command before.
Moreover, the command is not "default-information originate" as the
OSPF/RIP/BGP. It is an IGRP/EIGRP command which is "default-information
[in|out] <access-list-number|access-list-name>"..
- William Chen
----- Original Message -----
From: "Jonathan V Hays" <jhays@jtan.com>
To: "'William Chen'" <kwchen@netvigator.com>; <ccielab@groupstudy.com>
Sent: Friday, November 28, 2003 12:48 AM
Subject: RE: default-information - EIGRP command
> William,
>
> Please read be sure to check the Doc CD before making a request for
> information. A question about some undocumented aspect of a command or
> some unusual use or error message is a good use of this mailing list.
> Asking very simple questions with obvious answers about commands easily
> found on the Doc CD is not.
>
> If you don't know where the Configuration Guides and Command References
> are on the Doc CD
>
> 1. Go to the following URL: www.cisco.com
>
> 2. Under "Useful Links" on the right side of the web page, click
> "Technical Documentation"
>
> 3. From the "Cisco IOS" drop down list select "Release 12.2"
>
> 4. Next, click "Cisco IOS Release 12.2 Configuration Guides and Command
> References"
>
> 5. EIGRP information can be found under these two links:
>
> IPC: Cisco IOS IP Configuration Guide, Release 12.2
>
> IP2R: Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols,
> Release 12.2
>
> HTH,
>
> Jonathan
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> William Chen
> Sent: Thursday, November 27, 2003 11:15 AM
> To: ccielab@groupstudy.com
> Subject: default-information - EIGRP command
>
>
> Dear all,
>
> Can anyone tell me what is the use of the "default-information [in |
> out]"
> command of EIGRP.
>
> --- William Chen
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3