From: R&S Groupstudy (rsg@synergy-networking.co.uk)
Date: Thu Nov 27 2003 - 13:32:37 GMT-3
try using two lines - also direction of filter-list:
router bgp 1
neighbor 1.1.1.1 filter-list 5 in||out
neighbor 1.1.1.1 weight 300
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Pun, Alec CL
Sent: 27 November 2003 16:14
To: ccielab@groupstudy.com
Subject: neighbor filter-list weight command
Any tried the following command ?
router bgp 1
neighbor 1.1.1.1 filter-list 5 weight 300 <------
ip as-path access-list 5 permit ^100$
It is not available in my Cisco 2600 running IOS 12.2
regards,
alec
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3