From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Nov 25 2003 - 18:41:56 GMT-3
Pierre,
Yes, all you need is the 'ip router isis' command on the dialer
interface. Note that IS-IS as defined by interesting traffic is 'protocol
clns_is' Later releases do not list it in the help but it is there. Most
likely they removed it from the help because they're going to cover it on
the CCIE lab in the near future ;)
Post your configs if you're still having trouble.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 708-362-1418 (Outside the US and Canada)
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Pierre-Alex
> Sent: Monday, November 24, 2003 2:48 PM
> To: ccielab@groupstudy.com
> Subject: IS-IS on ISDN NOT LEGACY !!!
>
> Is it possible to configure IS-IS over ISDN NOT using legacy ISDN?
>
> My configs trigger the link etc... but the dialer does not manage to bind
> :
> the whole thing fails after ppp authentication is negotiated sucessfully.
>
> If you have a working config can you please post?
>
> Thanks,
>
> Pierre-Alex
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:17 GMT-3