From: Errol Fernandes (errolf@ceg.co.za)
Date: Mon Nov 24 2003 - 10:34:09 GMT-3
Hi Group
I've been through most threads on group study regarding this topic and require
a simple answer to my questions. a,b or c (do not guess please)
No Bandwidth given: bandwidth percent xx command
when converting from CQ to CBWFQ and working with % (no bandwidth given) you
would calculate as follows: queue 1 = 30% queue 2 =50% & queue 3 = 20%
(default queue).
Question:
a) required to adjust max-reserved-bandwidth to 100 on interface
b) not required to do anything more
c) 30%, 50% and 20% needs to * 0.75 as only 75% is available by default
Bandwidth given: bandwidth xx command
a) bandwidth * (30%, 20% or 50%) * 0.75
b) bandwidth * (20%,20% or 50%) as custom queue uses 100% of bandwidth
c) bandwidth * (20%,20% or 50%) + change max-reserved-bandwidth to 100
regards,
Errol
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:16 GMT-3