From: Ken.Farrington@barclayscapital.com
Date: Sun Nov 23 2003 - 15:39:33 GMT-3
Can I just confirm below, that the lsap-output-filter filters on the local
router, so it would look at incoming saps and not send them any further than
the local router if the access-list is denying it.
Just the dlsw config guid is a little confusing.
Many thx,
Ken
If you want to restrict traffic to SNA and not send Netbios packets there
are various ways to do this. One way is to filter by SAP. First create an
access list:
access-list 200 permit 0x0000 0x0d0d
Then reference the list from the dlsw remote-peer statement:
dlsw remote-peer 0 tcp 10.1.0.29 lsap-output-list 200
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:16 GMT-3