From: Brian Green (brian2331@yahoo.com)
Date: Sat Nov 22 2003 - 09:49:29 GMT-3
hi group,
im running a simple back to back test scenario over RIP and load balancing on two serial connections using similar hop metrics. while doing a traceroute with no numerical display for 14 packets i see this display :
Router#traceroute
Protocol [ip]:
Target IP address: 12.0.0.1
Source address: 9.0.0.1
Numeric display [n]:
Timeout in seconds [3]:
Probe count [3]: 14
Minimum Time to Live [1]:
Maximum Time to Live [30]:
Port Number [33434]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Type escape sequence to abort.
Tracing the route to 12.0.0.1
1 11.0.0.2 16 msec
10.0.0.2 16 msec
11.0.0.2 20 msec
10.0.0.2 20 msec
11.0.0.2 20 msec
10.0.0.2 20 msec
11.0.0.2 20 msec
10.0.0.2 20 msec
11.0.0.2 20 msec
10.0.0.2 20 msec
11.0.0.2 20 msec
10.0.0.2 20 msec
11.0.0.2 16 msec
10.0.0.2 20 msec
Router#
while using traceroute with numeric display on i see this :
Router#traceroute
Protocol [ip]:
Target IP address: 12.0.0.1
Source address: 9.0.0.1
Numeric display [n]: y
Timeout in seconds [3]:
Probe count [3]: 14
Minimum Time to Live [1]:
Maximum Time to Live [30]:
Port Number [33434]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Type escape sequence to abort.
Tracing the route to 12.0.0.1
1 11.0.0.2 20 msec
10.0.0.2 16 msec * 16 msec
11.0.0.2 16 msec * 16 msec
10.0.0.2 16 msec * 16 msec
11.0.0.2 16 msec * 16 msec
10.0.0.2 16 msec
Router#
my question is what is use of USING NUMERIC DISPLAY ..does it help in any specific scenario in real life ....and why do i loose 1 packet each time in the above dispaly with numeric display on ...
thank you for the help !!!
---------------------------------
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:15 GMT-3