From: pita40 (pita40@hotmail.com)
Date: Fri Nov 21 2003 - 13:13:27 GMT-3
Can some one post a good example when to use BGP Prefix-Based Outbound Route
Filtering. The example in CCO did not do justice to the topic. When you
configure the command do you need to have a prefix-list associated with it?
Below is CCO example
router bgp 100
address-family ipv4 unicast
neighbor 172.16.1.2 remote-as 200
neighbor 172.16.1.2 capability orf prefix-list send
router bgp 100
address-family ipv4 unicast
neighbor 192.168.1.2 remote-as 200
neighbor 192.168.1.2 capability orf prefix-list both
Also what is the difference with the command below from capability orf
prefix-list send above
router bgp 100
neighbor 176.16.1.2 capability orf prefix-filter send
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:15 GMT-3