From: Michael Snyder (msnyder@wk.net)
Date: Wed Nov 19 2003 - 23:06:22 GMT-3
See Below, this has to be a bug. My ISDN requires multiple maps for
both channels, but I also tried a single map with the same results.
Debug is telling me I don't have a map, but I'm looking at it.
The link works fine in dialer-group mode. I switch it to deny ip just
because a dialer-list isn't needed with watch mode.
I can do this with a dialer interface, but I shouldn't have too.
R2#show run int bri0
Building configuration...
Current configuration : 457 bytes
!
interface BRI0
ip address 150.50.9.5 255.255.255.252
encapsulation ppp
dialer idle-timeout 30
dialer watch-disable 300
dialer map ip 150.50.9.6 name R5 broadcast 2221
dialer map ip 150.50.9.6 name R5 broadcast 2222
dialer load-threshold 4 either
dialer watch-group 2
dialer-group 1
isdn switch-type basic-net3
isdn spid1 1111
isdn spid2 1112
ppp authentication pap
ppp pap sent-username hub password 7 04521B031731495C1D
ppp multilink
dialer watch-list 2 ip 150.50.10.5 255.255.255.255
dialer watch-list 2 delay route-check initial 30
dialer-list 1 protocol ip deny
end
R2#
%OSPF-5-ADJCHG: Process 24, Nbr 150.50.5.5 on Serial0 from FULL to DOWN,
Neighbor Down: Dead timer expired
R2#
DDR: Dialer Watch: watch-group = 2
DDR: network 150.50.10.5/255.255.255.255 DOWN,
DDR: primary DOWN
DDR: Dialer Watch: Dial Reason: Primary of group 2 DOWN
DDR: Dialer Watch watch-group 2 -
dialer map/string not present on BR0
R2#
------------------------------------------------------------------------
--- R5interface BRI0 ip address 150.50.9.6 255.255.255.252 encapsulation ppp dialer idle-timeout 45 dialer map ip 150.50.9.5 name hub broadcast 1111 dialer map ip 150.50.9.5 name hub broadcast 1112 dialer load-threshold 4 either dialer-group 1 isdn switch-type basic-net3 isdn spid1 2221 isdn spid2 2222 ppp authentication pap ppp pap sent-username R5 password 7 12090404015E ppp multilink
dialer-list 1 protocol ip deny
Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sun 03-Feb-02 22:01 by srani Image text-base: 0x0307EEE0, data-base: 0x00001000
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:14 GMT-3