From: David Porta (David.Porta003@msd.govt.nz)
Date: Mon Nov 17 2003 - 21:18:04 GMT-3
Hi Silvio,
I believe you still have to create the class "CLASS-DEFAULT" before you assign
it to the policy map.
ie:
!
class CLASS-DEFAULT
match cos 1
!
policy-map COS_2_TOS
class CLASS-DEFAULT
set ip dscp AF11
!
service-policy input COS_2_TOS
!
Also don't get confused with nested classes.
Remember that when you define your class for classification of traffic one of
your match criteria is the "match class" option.
I hope this clarifies things for you.
Cheers,
David
Silvio Nunes wrote:
> Group,
>
> I am reading some Cisco Documentation about CBWFQ, and I saw that there is a
> class class-default xxx command inside policy-map configuration, but I can4t
> see this option.
>
> What is a correct way to create a class-default for CBWFQ ?
>
> Thanks
>
> _________________________________________________________________
> MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-------------------------------
This email message and any attachment(s) is intended only for the
person(s) or entity(entities) to whom it is addressed. The
information it contains may be classified as IN CONFIDENCE and may be
legally privileged. If you are not the intended recipient any use,
disclosure or copying of the message or attachment(s) is strictly
prohibited. If you have received this message in error please
notify us immediately and destroy it and any attachment(s).
Thank you. The Ministry of Social Development accepts no
responsibility for changes made to this message or to any
attachment(s) after transmission from the Ministry.
-------------------------------
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:13 GMT-3