From: Henry Chou (henchou@hotmail.com)
Date: Mon Nov 17 2003 - 15:33:42 GMT-3
3550 does not support full PVLAN, meaning you cannot configure community
...etc. It only supports PVLAN edge.
From: "Scott Morris" <swm@emanon.com>
To: "'Jaksec, Nick'" <Nick.Jaksec@acs-inc.com>, <ccielab@groupstudy.com>
Subject: RE: PVLAN on 3550
Date: Mon, 17 Nov 2003 13:12:03 -0500
If you read the release notes for the 3550, you will see that the
commands are included, but currently have no effect. It's a "pending"
thing...
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jaksec, Nick
Sent: Monday, November 17, 2003 1:09 PM
To: 'ccielab@groupstudy.com'
Subject: PVLAN on 3550
I notice on a 3550 switch running EMI that it has the PVLAN commands.
Can this be done even though I see no documentation on Cisco's website
pertaining to a 3550. I only see it referencing a 4006 or 6500 switch.
Any thoughts would be appreciated, thanks!
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:13 GMT-3