channel-group with mode desirable non-silent

From: Adminl@kuix.com
Date: Sun Nov 16 2003 - 07:46:59 GMT-3

• Next message: Adminl@kuix.com: "2 question on (ISDN and ATM)"
• Previous message: Kelly, Russell G: "RE: Auto RP"
• Next in thread: Kelly, Russell G: "RE: channel-group with mode desirable non-silent"
• Maybe reply: Kelly, Russell G: "RE: channel-group with mode desirable non-silent"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dears...

I have 2 cats 3550 with 2 links..with following configuration

Sw1&SW2

interface FastEthernet0/23
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
 channel-group 1 mode desirable non-silent
!
interface FastEthernet0/24
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
channel-group 1 mode desirable non-silent

Is non-silent here is important or can configure it without this keyword,,Or both is right???

Sw1&SW2

interface FastEthernet0/23
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
 channel-group 1 mode desirable
!
interface FastEthernet0/24
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
channel-group 1 mode desirable

• Next message: Adminl@kuix.com: "2 question on (ISDN and ATM)"
• Previous message: Kelly, Russell G: "RE: Auto RP"
• Next in thread: Kelly, Russell G: "RE: channel-group with mode desirable non-silent"
• Maybe reply: Kelly, Russell G: "RE: channel-group with mode desirable non-silent"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:12 GMT-3