From: Scott Morris (swm@emanon.com)
Date: Fri Nov 14 2003 - 12:33:11 GMT-3
You can find it easy enough with the ? Help from route-maps...
Emanon-R1(config-route-map)#set ip prec ?
<0-7> Precedence value
critical Set critical precedence (5)
flash Set flash precedence (3)
flash-override Set flash override precedence (4)
immediate Set immediate precedence (2)
internet Set internetwork control precedence (6)
network Set network control precedence (7)
priority Set priority precedence (1)
routine Set routine precedence (0)
<cr>
"high" is not one of the values listed. If you have anything saying
"high" that likely will lead you to priority queuing.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tony Schaffran
Sent: Friday, November 14, 2003 9:36 AM
To: 'Alec'; ''Ccielab (E-mail)'
Subject: RE: QoS Priority
I actually came across a command that with the ? it showed what IP
precedence 0 thru 7 correlated to. i.e. normal, high, critical,
internet, and so on. I will try to dig it up again and let you know if
I find it.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alec
Sent: Friday, November 14, 2003 6:10 AM
To: 'Ccielab (E-mail)
Subject: QoS Priority
If I am asked to classify incoming traffic to normal and high priority
by CAR, what value (IP Precedence or DSCP) should I set ? Any reference
?
alec
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:11 GMT-3