From: Barney Gaumer (bagaumer@yahoo.com)
Date: Thu Nov 13 2003 - 06:28:56 GMT-3
linux:
ssh -c des -l joeuser 1.1.1.1
or if no tacacs+ then
ssh -c des 1.1.1.1
If you have a GUI ssh client for winders then you just
need to enable ssh v1 and make sure that password
shadowing isn't on.
--- Nguyen Hoang Long <ng-hlong@hn.vnn.vn> wrote:
> Some of the Cipher types that may be in your Linux
> box SSH client are: DES /
> 3DES / RC4 / Blowfish
> However, Cisco IOS supports only DES & 3DES; if your
> IOS is DES, then only
> DES supported.
>
> Check the restrictions:
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/fothersf/scfssh.htm#1001119
>
>
> Long
> CCNA/CCNP/CCIE Bootcamp
> www.vn-experts.net.vn
>
> ----- Original Message -----
> From: "Tasuka Amano Hsu" <tasuka@mac.com>
> To: "ccielab Groupstudy" <ccielab@groupstudy.com>
> Sent: Wednesday, November 12, 2003 10:26 PM
> Subject: SSH login from Linux
>
>
> > After I configure SSH on Cisco router,
> > login from cisco router is fine, but after I login
> from linux is fail,
> > and the debug say :
> >
> > SSH0: starting SSH control process
> > SSH0: sent protocol version is SSH-1.5-Cisco-1.25
> > SSH0: protocol version id is -
> SSH-1.5-OpenSSH_3.4p1+CAN-2003-0693
> > SSH0: SSH_SMSG_PUBLIC_KEY_msg
> > SSH0: Session disconnected - error 0x07
> >
> > and the message from linux box :
> >
> > Select cipher type <unknown> not supported by
> server.
> >
> > So, what cipher type cisco supported ?
> >
> > sincerely,
> > Tasuka
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:11 GMT-3