From: Sam Joseph (samjoseph747@hotmail.com)
Date: Thu Nov 13 2003 - 02:18:13 GMT-3
Dear Group,
I am at BGP part of self study and have a quick question.
Scenario:
The routers are connected as below.
R1------R2------R3------R4
Between R1 and R2 EBGP is running. R3 & R4 EBGP is running. R2 & R3 runs
ospf. R1 is advertising a route 192.168.100.0 with appropriate Network
Command. R2 is advertising a route of 192.168.200.0.
At R2 & R3, the BGP Learned routes are re-distributed to ospf.
Sh ip bgp at r1:
Network Next Hop Metric LocPrf Weight Path
*> 192.168.110.0 0.0.0.0 0 32768 i
*> 192.168.200.0 192.168.1.193 0 100 300 i
Sh ip route at R1:
192.168.110.0/30 is subnetted, 1 subnets
C 192.168.110.0 is directly connected, Loopback1
B 192.168.200.0/24 [20/0] via 192.168.1.193, 00:27:04
192.168.1.0/30 is subnetted, 1 subnets
C 192.168.1.192 is directly connected, Ethernet0
192.168.100.0/32 is subnetted, 1 subnets
C 192.168.100.7 is directly connected, Loopback0
Sh ip bgp at R4:
*> 192.168.110.0 192.168.1.205 0 100 200 i
*> 192.168.200.0 0.0.0.0 0 32768 i
Sh ip route at R4:
B 192.168.110.0/24 [20/0] via 192.168.1.205, 00:29:46
C 192.168.200.0/24 is directly connected, Loopback1
192.168.1.0/30 is subnetted, 1 subnets
C 192.168.1.204 is directly connected, Ethernet0
192.168.100.0/28 is subnetted, 1 subnets
C 192.168.100.0 is directly connected, Loopback0
When I try to Ping 192.168.200.1 from r1, I get request timed out. Try to
ping 192.168.110.1 from R4, request timed out.
I can make this to work, by entering nei.....ip add.....default-originate
command at r2 & r3. Advertise default route to r1 & R4 from R2 & R3.
Is this the right way ?. Any better way?.
Thakns a lot,
---Sam.
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:11 GMT-3