SNMP enable traps

From: William Chen (kwchen@netvigator.com)
Date: Wed Nov 12 2003 - 08:58:47 GMT-3

• Next message: Cristian Henry H: "Re: BGP RIB Failure"
• Previous message: Deh Kofi: "RE: Distributing loopback into OSPF"
• Next in thread: yu chunyan: "Re: SNMP enable traps"
• Maybe reply: yu chunyan: "Re: SNMP enable traps"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear group,

   Just want to confirm:
 
   The command "snmp-server enable traps <type>" is globally enable the traps <type> for all the SNMP server defined, and the command "snmp-server host <ip> <string> <type>" will only enable the traps <type> for this SNMP server. Am I correct?

   For example, if I issue the command "snmp-server enable traps mac-notification" then the switch will send traps to all SNMP servers configured if a new host added to mac address table. However, if I just issue the command "snmp-server host 192.168.1.10 secret mac-notification", then the traps will only send to 192.168.1.10.

Best Regards,
William Chen

• Next message: Cristian Henry H: "Re: BGP RIB Failure"
• Previous message: Deh Kofi: "RE: Distributing loopback into OSPF"
• Next in thread: yu chunyan: "Re: SNMP enable traps"
• Maybe reply: yu chunyan: "Re: SNMP enable traps"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:10 GMT-3