From: kurt (kurt@cybernex.net)
Date: Mon Nov 10 2003 - 16:14:23 GMT-3
you can ....
just be more specific then "clear xlate"
clear xla ?
usage: show|clear xlate [global|local <ip1[-ip2]> [netmask <mask>]]
[gport |lport <port1[-port2]>]
[interface <if1[,if2]>]
[state <static[,portmap][,norandomseq][,identity]>]
[debug]
----- Original Message -----
From: "Casey, Paul (6822)" <Paul.Casey@o2.com>
To: <cisco@groupstudy.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, November 10, 2003 1:48 PM
Subject: PIX question
> Hello
>
> On a PIX firewall, can I clear xlate for specific NAT translatations
becasue
> it appears to me when ever I use this command it bring the PIX effectivily
> out of service as all NAT translations are cleared and have to re-built
for
> that instance.
>
> What I would like to do it clear specific NAT translations as opposed to
all
> translations on the PIX.
>
> Any help appreciated.
> Kind regards.
>
>
>
>
>
****************************************************************************
************
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and
intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
>
****************************************************************************
*************
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:10 GMT-3