Re: WHen broadcast keyword is required?

From: MADMAN (dmadlan@qwest.com)
Date: Mon Nov 10 2003 - 14:23:13 GMT-3

• Next message: Danny.Andaluz@triaton-na.com: "RE: EIGRP auto-summary question"
• Previous message: Peng Zheng: "WHen broadcast keyword is required?"
• Maybe in reply to: Peng Zheng: "WHen broadcast keyword is required?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Peng Zheng wrote:

> For
>
> frame-relay interface-dlci DLCI [broadcast]
>
> When broadcast keyword is needed?

   When using old IOS:

C7507A(config-subif)#frame-relay interface-dlci 16 ?
   cisco Use CISCO Encapsulation
   ietf Use RFC1490/RFC2427 Encapsulation
   ppp Use RFC1973 Encapsulation to support PPP over FR
   protocol Optional protocol information for remote end
   <cr>

  If I recall several years ago you needed to use the broadcast keyword
to get routing protocols and other broadcast dependant protocols to
work. Since at leat 12.0 in not earlier frame p-p subinterface now work
as one would expect, negating the need to this keyword.

   Dave

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"Emotion should reflect reason not guide it"

• Next message: Danny.Andaluz@triaton-na.com: "RE: EIGRP auto-summary question"
• Previous message: Peng Zheng: "WHen broadcast keyword is required?"
• Maybe in reply to: Peng Zheng: "WHen broadcast keyword is required?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:10 GMT-3