From: Jung, Jin (jin.jung@lmco.com)
Date: Mon Nov 10 2003 - 09:45:01 GMT-3
There is NO way to show class A address in BGP table as class C with out /24
mask.
Or class B as Class C with out /24 mask at the end,
Only classful route will show up in BGP table without the mask.
> Jin Jung CCIE#12368
> Network Infrastructure Engineer
-----Original Message-----
From: asadovnikov [mailto:asadovnikov@comcast.net]
Sent: Sunday, November 09, 2003 10:06 AM
To: 'Pun, Alec CL'; 'rionaldi'; 'CCIE Study Group'
Subject: RE: BGP Route without subnet information
Or an aggregate address command under BGP
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Pun,
Alec CL
Sent: Sunday, November 09, 2003 8:52 AM
To: rionaldi; CCIE Study Group
Subject: RE: BGP Route without subnet information
how about using auto-summary under router bgp ?
alec
-----Original Message-----
From: rionaldi [mailto:rionaldi@cbn.net.id]
Sent: Sunday, November 09, 2003 9:27 PM
To: CCIE Study Group
Subject: BGP Route without subnet information
Dear All,
Is it possible to inject route into BGP table without including any subnet
information. So in the BGP table for destination the route will be shown
10.0.0.0 only instead of 10.0.0.0/24.
regards,
PU
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:10 GMT-3