From: jfaure@sztele.com
Date: Mon Nov 10 2003 - 05:52:33 GMT-3
Hi Alexei:
Yes, i could upgrade the old firmware of the current supervisor, but as you
probably know , this operation is done physically replacing the ROM chip on
the supervisor (the supervisor 1 and 1A are only "firmware upgradable via
hardware", the supervisor II however can be upgraded via software).
As our customer has a Supervisor 1A and this firmware upgrade wasn't
offerted, i only like to know if having these two different firmware
version could suppose a problem.
Many thanks
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
"asadovnikov"
<asadovnikov@co Para: <jfaure@sztele.com>,
mcast.net> <ccielab@groupstudy.com>
cc:
08/11/03 04:31 Asunto: RE: Catalyst 6000 firmware
Although I trust this is a supported configuration and you should not have
any issues, why not upgrade to the same level? It only takes short time to
upgrade an going to save you a lot of worries versus running 2 different
versions.
Best regards,
Alexei
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jfaure@sztele.com
Sent: Friday, November 07, 2003 9:05 AM
To: ccielab@groupstudy.com
Subject: OT: Catalyst 6000 firmware
Hi all:
Suppose you have two Supervisor Engines 1A in a 6000 chasis, and the Boot
ROM version (this is the firmware) is different from one to another, but
both firmware versions can support the CATOS version you're planning to
install on them.
Anyone knows if this could be a problem for the sytem or not?
Thank you very much for your help
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:10 GMT-3