frame-relay broadcast queue question

From: Karim AbdelMonem (karim_ccie@hotmail.com)
Date: Wed Nov 05 2003 - 19:17:17 GMT-3

• Next message: Stuart Reabow: "Queue for voice signalling"
• Previous message: christopher snow: "Re: OT: Free IEWB-RS Sample Lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,

Searching on cco. about the parameters used for the frame-relay broadcast
queue:
"frame-relay broadcast-queue size byte-rate packet-rate"

got the following:
As a general rule, start with 20 packets per DLCI. The byte rate should be
less than both of the following:
-N/4 times the minimum remote access rate (measured in bytes per second),
where N is the number of DLCIs to which the broadcast must be replicated.
-1/4 the local access rate (measured in bytes per second).

Does anyone has further explanation or another links talking about these
parameters exact calculations.

Thanks,
Karim.

• Next message: Stuart Reabow: "Queue for voice signalling"
• Previous message: christopher snow: "Re: OT: Free IEWB-RS Sample Lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:08 GMT-3