From: ccie done (ccie1@lycos.com)
Date: Sun Nov 02 2003 - 06:16:07 GMT-3
Hello Giants ;
i have a problem and i need some help if anyone has done CES config before .
i have CES card with 4 ports part of LS1010 box and is connecting to PBX , 2 ports are used each with 30 channel ..using unstructured service .
setup is like this
(HQ PBX)----E1----(LS1010-CES)----{ATM cloud}---(LS1010-CES)----E1--(SITE PBX)
instead of single E1 i have 2 and also two PVC for the ATM cloud
the problem is that when i enable the two ports together ..only one at a time can pass the call ..after while the two ports swich over ..the working one becomes not working and the second one work ..this happens periodically .
The configuration of both site are as follows
=====================
HQ config
network-clock-select 1 CBR9/0/0
!
interface CBR9/0/0
ces circuit 0 circuit-name HQ1
ces pvc 0 interface ATM9/1/0 vpi 2 vci 100
!
interface CBR9/0/1
ces circuit 0 circuit-name HQ2
ces pvc 0 interface ATM9/1/0 vpi 2 vci 99
!
=========================
SITE config is
network-clock-select 1 CBR11/0/0
network-clock-select 2 CBR11/0/1
!
interface CBR11/0/0
ces circuit 0 circuit-name HQ1
ces pvc 0 interface ATM12/1/0 vpi 2 vci 100
!
interface CBR11/0/1
ces circuit 0 circuit-name HQ2
ces pvc 0 interface ATM12/1/0 vpi 2 vci 99
!
--------------------------------------------
im not sure if the problem is clocking ...i dont have strong understanding about it .
also one more thing ..what is the use of the command
Ces aal1 clock { adaptive -..etc}
i appreciate if anyone has faces something like this cofnigutiation before
regards
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:07 GMT-3