From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Oct 26 2003 - 15:04:11 GMT-3
Rack1R6(config)#router eigrp 10
Rack1R6(config-router)#eigrp router-id ?
A.B.C.D EIGRP Router-ID in IP address format
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Shafi, Shahid
Sent: Sunday, October 26, 2003 9:54 AM
To: Brian Dennis; Alec; ccielab@groupstudy.com
Subject: RE: OSPF router-id in real lab
Hi Brian,
Can you router's id for EIGRP? Never did it and never thought about it??
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: Sunday, October 26, 2003 9:34 AM
To: 'Alec'; ccielab@groupstudy.com
Subject: RE: OSPF router-id in real lab
Yes, use a loopback interface's IP address for your OSPF, BGP and to
play it
safe, EIGRP router-id.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alec
Sent: Sunday, October 26, 2003 9:28 AM
To: ccielab@groupstudy.com
Subject: OSPF router-id in real lab
If the lab exam does not require you to configure OSPF router-id, will
you
make up your own router-id using the highest loopback IP ? It will be
easier
to more safe for OSPF virtual link configuration. Your comments are
welcome.
alec
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:08 GMT-3